Super Stock Class

Technical Regulations: Super Stock Class

1. Only Tamiya TT-01 series and TT-02 series are allowed.
2. Only participants who have yet to enter A-main of TAC Finals (regardless of category) are allowed to take part.
3. Only Tamiya Brushless E.S.C and Motor are allowed.

*See ESC and Motor Specification list.

4. Only Tamiya TBLM-02S 15.5T motor is allowed, Maximum KV – 2600
   Motors will need to be check and tagged before race
5. Tires allowed: Tamiya Type C (#54256) – Carpet (Indoor), Tamiya Type B3 (#53705) – Asphalt (Outdoor)
6. Inserts allowed: Tamiya Medium-Narrow Medium Inner (#53582)
7. Final Drive ratio (FDR) is controlled.

*See Gear Ratio List for more information.

8. Any Original Tamiya Hop-up option and spare parts is allowed as long as it is used in the way it is designed for.
9. All body shells must be painted.
10. Any attempt to modify or influence the ability of the motor is not allowed. No changing of motor connectors is allowed. However, motor timing (in the case of TBLM-02S) is allowed but participants will have to take full responsibility in the event of failure to complete run due to motor overheating issues.
11. Any attempt to modify or to influence the ability of the E.S.C is NOT allowed (inclusive of adding additional capacitors or any other influencing device). Only battery plugs are allowed to be changed.
12. Minimum weight of car after run: 1380g
13. Clearance under main chassis parts (including battery tape) must exceed 5mm after race.
14. Any form of driving aid is not allowed to be use.

(E.g. Gyro, Active Steering Assist Unit)

15. All Tamiya 1/10 Scale Bodyshell is ALLOWED (Except: BMW series, NSX (super GT version), B4 Legarcy) (Lightweight or sticker variations is allowed)

 

 

*Note: For participants that qualify for TAC Finals 2019, rules and regulations might vary and participants are strictly recommended to abide to the rules and regulations for TAC Finals 2019.